- GST No. 09AAHCS2336R1ZP
- Send SMS
- Send Email
Silicone Hoses
Silicone Hoses are widely used for heating & cooling system to CAC (Charge Air Cooler) in hot and cold side, Turbo Charger System & Custom Compressor, Intercooler or Intake & Inlet Piping for Turbo / Super Charger in Engine compartment and other applications.
The idea of a silicone hose is that you replace the standard hose so it doesn't expand and get hot under pressure. Silicone hoses are capable of carrying fluids at much higher temperatures than rubber.
Type of Silicone Hoses
General Features of Silicone Hoses
The idea of a silicone hose is that you replace the standard hose so it doesn't expand and get hot under pressure. Silicone hoses are capable of carrying fluids at much higher temperatures than rubber.
Type of Silicone Hoses
- Standard Silicone Hose (Radiator/Turbo charger).
- Silicone Charge Air Cooler (CAC) Hose.
- Silicone Vacuum Tubing.
- Silicone Heater Hose.
- Marine Exhaust Hose.
- Silicone Duct Hose.
- Medical Grade Silicone Hose & Tubing.
- Specialty Silicone Hose (Branch).
- Bespoke Silicone Hose.
- Silicone Hose Kits.
- Silicone Hump Hose.
General Features of Silicone Hoses
- Wide Range of Standard Built Straight ,Elbow, Reducer, Hump, Coupler and Formed Hose.
- Application in Coolant and Turbocharger ( Air Intake System)
- Available in a Variety of standard and variable Shape, Size and length.
- Made in different glossy colours i.e. glossy Red, Blue, Black, Green,etc.
- Liner and cover with high quality Silicone rubber.
- Fluorosilicone liner for fuel and oil application.
- Multiply reinforcement with Nylon and polyester.
- Aramid / Kevlar reinforcement for high heat resistance.
- Wall thickness 2.5 to 7mm and more as per requirements.
- General Temperature range -60°C to +300°C.
- Silicone Heater & Coolant Hoses meets the requirements of temperature from - 60ºC to + 180 ºC and - 60ºC to + 300ºC for CAC Connectors & Sleeves.
- Meets the specification as per SAE J20, SAE J30, SGH 1801, Class A material and other standard.
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features :
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance
Sizes :
- ID (mm) : As per Customer Requirement
- Leg Length1(mm) : As per Customer Requirement
- Leg Length2 (mm) : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features:
- Able to make a cast of an original hose and replace it.
- Use with Air, Water, Fuel, Oil & Coolant.
- Perfect product fitment.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Use in Racing bike, Race cars, Rally cars, Classic cars, Bike engine car, etc.
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Resistance to UV & Ozone.
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features:
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance.
Sizes :
- ID1 (mm): As per Customer Requirement
- ID2 (mm): As per Customer Requirement
- Length (mm) : As per Customer Requirement
- Wallthickness (mm): As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features:
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance.
Sizes :
- ID1 (mm) : As per Customer Requirement
- ID2 (mm): As per Customer Requirement
- Leg Length(mm) : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Used in high temperature Turbocharger Application |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features:
- 3/4 plies or custom ply construction with woven / knitted Aramid (Nomex)fabric reinforcement to meet flexibility, burst strength and fatigue resistance at high temperature.
- Fluorocarbon liner to increase the oil resistance.
- Single / multiple hump to compensate misalignment and offset vibration.
- High pressure retention ring.
Sizes :
- ID (mm) : As per Customer Requirement
- Leg Length(mm) : As per Customer Requirement
- No. Hump : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features :
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance.
Sizes :
- ID (mm) : As per Customer Requirement
- Leg Length (mm) : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features :
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance.
Sizes :
- ID1 (mm) : As per Customer Requirement
- ID2 (mm) : As per Customer Requirement
- Leg Length (mm) : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features:
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance.
Sizes :
- ID (mm) : As per Customer Requirement
- Leg Length1(mm) : As per Customer Requirement
- Leg Length2 (mm) : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features:
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance.
Sizes :
- ID (mm) : As per Customer Requirement
- Leg Length1(mm) : As per Customer Requirement
- Leg Length2 (mm) : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
| Business Type | Manufacturer, Exporter, Trader |
| Uses | Coolant, Turbocharger, CAC, Air, Air with Oil Vapours, Air with Fuel Vapours, etc. |
| Working Temperature | -60ºC to + 300ºC. |
Preferred Buyer From
| Location | Worldwide |
Features:
- Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
- Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
- Material properties & performance as per SAE J20, SAE J30,SGH 1801 or as any specified customer standard.
- Excellent Ozone and UV Resistance.
Sizes :
- ID (mm) : As per Customer Requirement
- Leg Length1(mm) : As per Customer Requirement
- Leg Length2 (mm) : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
